
This episode discusses the properties and applications of JetLube MP-50 Moly Paste as an anti-seize compound in extreme service conditions.
JetLube MP-50 Moly Paste is the definitive molybdenum disulfide anti-seize compound for procurement teams and reliability engineers who cannot afford galling, seizure, or stick-slip in extreme-temperature applications. Spec it right the first time: https://www.pe-energy.com/product/28023-mp-50/ MP-50's functional core is a high-percentage MoS2 load suspended in an organo clay thickener with a petroleum fluid base. That moly disulfide plates metal surfaces — filling microscopic voids, reducing high points, and expanding the effective load-carrying area — driving the friction coefficient down to a measured 0.06 . Compare that to asphaltic or wax-based lubricants that soften, migrate, and leave surfaces bare when displaced. MP-50's ASTM D-566 dropping point is listed as none : no melt transition, no migration, no bare-metal failure. The temperature window here is serious. Anti-seize service rating runs -300°F (-185°C) to 750°F (400°C) . In mechanical components not exposed to air, good lubrication results can be anticipated up to 2000°F (1090°C) . Application is viable down to 0°F (-18°C) — brush or spatula directly onto the surface, hot or cold, without runoff. Flash point (ASTM…
Explore listener stats, chart rankings, contacts and more on the PE-Energy Industrial Supply – Powering Industry Excellence podcast page.