Why High Performance Diesel Engines Actually Fail..
About this episode
The episode discusses the common reasons high performance diesel engines fail, debunking myths and providing insights on piston clearance and timing.
You want to build a fast diesel and you don't want to blow it up in the process. This episode is the one you need before you ever touch a tune. Todd, Will, and Myer sit down and go through every real reason a high performance diesel engine dies, and it's rarely what you'd expect from reading the forums. They start by busting the EGT myth. Guys have been scared of exhaust gas temperature for decades, but heat alone almost never kills a build. What actually wrecks pistons is improper piston wall clearance, something the diesel performance world has gotten wrong for years. They break down cast versus forged pistons, correct ring gap on 12 valve and 24 valve Cummins engines, and why a factory rod that survives a worn out truck making 600 horsepower will bend the moment you put real power to a fresh, tight engine. From there they get into nitrous and timing. Todd and Will walk through why running too much timing with a big nitrous shot on a common rail is a fast way to send cylinder pressure through the roof, why sled pulling with water injection wants more timing than drag racing with nitrous, and how a lot of the old "nitrous blew it up" stories were actually piston…
More episodes of Power Driven Podcast
- What Actually KILLS a Diesel Engine?
- Diesel Tuning 101: Everything You Need To Know
- Spectator Ride-Alongs: The Most Fun We've Had At A Race
- Blown Head Gasket? Here's What You're Doing Wrong
- We Broke Down Every Cummins Camshaft
- Power Driven Just Bought The Most Legendary Name In Diesel Cams
Explore listener stats, chart rankings, contacts and more on the Power Driven Podcast podcast page.