S6 Ep326: Cord and Power Tool Management | Warehouse Safety Tips | Episode 326
About this episode
This episode discusses the importance of cord and power tool management in maintaining workplace safety.
https://jo.my/icpypw Cord and Power Tool Management A bad cord doesn’t look like much at first. A little nick in the jacket. A missing ground pin. A power strip tucked behind a desk with too many plugs in it. Small stuff, right? Not really. Electrical problems can turn fast. A damaged extension cord can shock a worker. A weak connection can heat up. A power tool with a bad cord can fail in someone’s hands. Fast. Dangerous. Preventable. A strong Safety Culture pays attention to the small things before they become big things. That’s the real work. We don’t wait for smoke, sparks, or for someone to get hurt. We build habits that catch hazards early, fix them quickly, and keep the facility moving safely. Here are a few tips to assist you with Cord & Power Tool Management: Inspect cords before use. Look for cuts, frays, exposed wires, loose plugs, cracked insulation, or missing ground pins. Don’t tape up a bad cord and call it good. Remove it from service and report it. Check power tools before plugging them in. Look at the cord, plug, trigger, guards, and housing. If something feels loose, smells hot, or sparks, stop using it. A tool should help the job, not add risk. Avoid…
More episodes of Safety Stripes by Mighty Line Floor Tape - The Best Workplace Safety podcast talking NFPA, EHS & Warehouse Safety Tips!
- S6 Ep328: Exit Routes, Drills, and Emergency Lighting | Warehouse Safety Tips | Episode 328
- S6 Ep327: Static Control, Grounding, and Dust Prevention in Dry Facilities | Warehouse Safety Tips | Episode 327
- S6 Ep325: Battery Charging Station Safety | Warehouse Safety Tips | Episode 325
Explore listener stats, chart rankings, contacts and more on the Safety Stripes by Mighty Line Floor Tape - The Best Workplace Safety podcast talking NFPA, EHS & Warehouse Safety Tips! podcast page.