Remote View

Huge thanks to Nathaniel Hanks (@Na_thanks) for setting up a twitter space and giving me the opportunity to speak with Stan Deyo.I had to speak really quietly, so after I normalised the levels, you’ll hear ‘heavy breathing’, sorry about that. Roy Herbert posed some great thoughts on his theories about time which Stan Deyo also spoke to.Stans patent that he discussesHarold Stanley Deyo, (Filed 14 Feb 2007) “Harmonic Energy Exchange Device” https://patents.google.com/patent/US20080191580A1/enAfter my discussion with him, he sought to discuss this video This is a public episode. If you'd like to discuss this with other subscribers or get access to bonus episodes, visit remoteview.substack.com/subscribe

References* R.W. Greenyer, “Working with nature - Possible nuclear reaction mechanism in water”, Taiwan Silicon Valley Presentation, Taipei, 13 Dec 2023* B-J Huang et. al “Anomalous gas emission from low-energy nuclear reaction of water”, ICCF-25 (2023).* B-J Huang et. al. “Water can trigger nuclear reaction to produce energy and anomalous gases.”, Nature – Scientific Reports, (Jan 2nd 2023). 10.13140/RG.2.2.20412.62081.* R.W. Greenyer, “O-Day - Flux capacitor”, MagicSound Lab and Alan Goldwater for MFMP, March 2024* G.G. Brock, “Introducing the 1A21 Vacuum Tube”, CA, USA* A.L. Shishkin “New type of penetrating radiation” Cold Nuclear Transmutation & Ball Lightning confrerence, Sochi, Russia, October 2018 This is a public episode. If you'd like to discuss this with other subscribers or get access to bonus episodes, visit remoteview.substack.com/subscribe

I have said many times that if it were not for Andrea Rossi’s theatrics in 2011, I would never have re-engaged with ‘Cold Fusion’. Whatever the facts are relating to this chapter in his personal journey, I think it is important to share it in a way that is accessible, so I have made the effort to produce an easier to absorb version of this interview for English speakers, the original, which is most accurate of course, can be watched in Nabil Oggi’s video below.The above vocal synthesised translation was created by using the paid auto-dubbing feature in ElevenLabs. The English subtitles (which are different) are from YouTube’s auto-transcription. This is a public episode. If you'd like to discuss this with other subscribers or get access to bonus episodes, visit remoteview.substack.com/subscribe

Hi, my name is Bob Greenyer, welcome to RemoteView.ICUI have mentioned that we are dealing with Pandora’s box several times and wanted to clarify my position, where we are and the journey ahead.The myth of Pandora's Box from Greek mythology tells of Zeus's retaliation against humanity after Prometheus stole fire for them.Zeus had Hephaestus create Pandora, the first woman, endowing her with gifts from all the gods, including irresistible curiosity. She was given a jar (often mistakenly called a "box") containing all the world's evils, which she was told not to open.Driven by her curiosity, Pandora eventually opened the jar, unleashing plagues, sorrows, and vices upon the world. Only after all evils had escaped did she manage to close it, trapping one element inside: Hope.This myth has been interpreted as a cautionary tale about curiosity, the nature of human suffering, and the dual role of hope in human life, symbolising both a comfort and a potential deception.Where we areWe live as curious and capable entities in a world where the box has already been opened and all the mythical evils have already been released and are being deployed to subjugate and frustrate our ability to flourish. The one thing that appears to have been withheld is hope.We must take charge of our own destiny and set free the remaining hope from Pandoras box before the control aspects of the evils shut it for ever.The Journey aheadHope represents an optimistic belief in positive outcomes, leveraging it will provide emotional comfort and motivate us as we deliver the positive potential of our new collective understanding. We must goal-set, find pathways, and maintain focussed determination through the challenges that lie ahead.Communities will unite through hope towards common goals. As a personal virtue, hope will act as a catalyst for change, despite the adversity we will face from those that choose to hold dominion over us.We must not let hope be used to deceive us, our toil must be on what we know to be true, not what we are led to believe will solve our challenges. The time for the deceivers is up.Through our own collective endeavour and ingenuity, we will earn the right to use the New [Eternal] Fire, that which manifests as the thunderbolt and the whirlwind, with or without the permission of Zeus.Thank you for listening to RemoteView.ICU This is a public episode. If you'd like to discuss this with other subscribers or get access to bonus episodes, visit remoteview.substack.com/subscribe

Hi, my name is Bob Greenyer, welcome to RemoteView.ICUThought for the day.In response to an email between Henk Jurrien and Rupert Sheldrake, I wrote the following. I’m tired and jet lagged from my rescue trip to Japan, but I’d appreciate your commentary.Hi Henk / Rupert,The hydrodynamic vortex in the aether is the root of 'O' structure, it is the irreducible program that is the foundation of "god's toolbox", with a little ‘g’.There are only two negentropic structures in the universe, the tornado vortex and the ring soliton with the latter merely being a closed vortex. Inherently, all forms of 'O' possess both. As such, they self-organise into a simple 'wheel, within a wheel, within a wheel' etc. structures.Ball Lightning is an extension of this structure which involves other derivative structures, such as electrons and protons etc. I do not consider Ball Lightning to be 'god's toolbox' - I consider 'O' to be it, but Ball Lightning is a very versatile tool as its ability to possess topological monopoles and extreme field gradients, whilst potentially having a non-electromagnetic radiating boundary, makes it a very powerful tool to synthesise, manipulate and de-synthesise baryonic matter.For me 'life' is the negentropic and entropic process cycle, you cannot ultimately have perceived time and the observation of life without a constant cycle from Alpha to Omega and back again. This is the 'circle of life'. God is the intent, the driver and is all. The divine has mastery and control over the vortex at all levels, as such, the divine is omnipresent and omnipotent.Since the entire human form appears to be the answer to the 'O' program, we are made in the program's image. Wherever stable chemistry levels of matter interaction is possible, it is likely that sentient beings, that can interact with God and source, will morphologically look similar to humans. Where only plasma or charge separated structures are possible, life will take the form of ball lightning or self similar structures and their aggregates on all scales. Ordinary baryonic matter is dormant in a similar way that a virus is dormant, both still have a constant interchange with the aether and further they have potential to participate in both organic (chemistry) and charge separated (plasma) forms of life. That being said, the non-baryonic universe is full of 'O' and its fractal conjugates, so there is no reason therefore to consider any part of a dynamic universe to be forever dead, at the very least it has persistent potential.It's all the same thingBobOf course, I may be wrong. I recorded the above before I watched this dialogue. This is a public episode. If you'd like to discuss this with other subscribers or get access to bonus episodes, visit remoteview.substack.com/subscribe

Hi, my name is Bob Greenyer and welcome to RemoteView.ICUThe following is my curated attempt at machine assisted translation of the awarded patent of Anatoly Kladov, using several sources, including those available on Russian and European patent servers and the original part typed and part hand written patent document. In all cases there were problems with the official sources, however, by combining them and re-constructing and verifying the key equations, I believe this is a workable document that gets across the bulk of the original intent of the patent.If you want to refer to the original documents to check, they are available from my blog article “ULTR - Method for Obtaining Energy” alongside a discussion of this document. Also, you will find my proposed possible reactions that could account for:* the extra COP produced during addition of 5% aluminosilicate suspension,* the production of Beta/Gamma radiation following the addition of ‘an amount of CO2’ and* the production of neutrons, following the addition of LiCl.These are my current best proposals to explain the phenomena observed based on my experience, I welcome any other suggestions. So, onto the patent.RU2054604C1FIELD: power engineering.EFFECT: increased efficiency.9 figures, 1 tableAbstractThe proposed method of obtaining energy involves feeding a liquid phase substance into a treatment zone where cavitation bubbles are created in the substance by producing a fluctuating pressure, with constant and variable components, based on the following relationships:P1 = from 0.3 to 0.7 (P2+P3); andP2 + P3 - P1 = from 1 to 10σ,in which:P1 - represents the constant pressure component (in MPa),P2 - represents the variable pressure component (in MPa),P3 - represents the saturated vapour pressure (in MPa) of the substance being treated at the temperature at which it is fed into the treatment zone, andσ - is the tensile strength of the substance being treated at the temperature at which it is fed into the treatment zone (in MPa).Description The invention relates to energy, in particular to the energy of strong interactions of elementary particles. Currently, there are many methods for producing energy that are widely known, for example, the method of generating thermal energy from solar radiation, kinetic energy from wind, water, thermal energy released during the burning of fossil fuels (coal, oil, gas), thermal energy released during the fission of heavy nuclei of chemical elements, the energy released during the fusion of the light nuclei of chemical elements, the energy released during the fusion of matter and antimatter. However, the radiation intensity of solar energy in the optical range is only a few 100 watts per square meter of surface. Therefore, a huge area is required to obtain the energy of solar radiation on an industrial scale. Wind energy is also characterised by low intensity despite the fact that it is two to three orders of magnitude higher than the intensity of solar radiation. The energy concentration of moving water is two to three orders of magnitude greater than that of wind energy. This value of about one MW per square metre is acceptable for commercial production of energy from moving masses of water, which is confirmed by the development of hydropower. Negative factors in this case are the need to create reservoirs and the flooding of large areas of the Earth's surface, high capital costs for the construction of hydropower facilities and limited resources. The energy released during the burning of fossil fuels (coal, oil, gas) is currently the main type of energy used on an industrial scale. Negative factors are environmental pollution during the extraction and transportation of fuel, fuel combustion products and heat, while the efficiency of thermal stations does not exceed 40% for mines, open pits, ash dumps, heaps, heat plants, cooling ponds, power lines and other structures included in the fuel-energy complex. Huge areas are allocated, which is a consequence of insufficient concentration of energy. A widely known method of generating energy is at thermal power plants. This method consists in burning organic fuel in the furnace of a steam boiler, where the chemical energy of the fuel is converted into the thermal energy of water vapour. However, for the implementation of this method requires a large energy consumption for the extraction of fossil fuels, for its transportation and combustion. In addition, fuel combustion leads to environmental pollution. At the same time, a large amount of substance at the stage of combustion is released into the atmosphere and hydrosphere in the form of gaseous products of combustion. Of all the chemical energy contained in fossil fuels, only about 30% reaches the consumer in the form of electrical energy. The rest is scattered in the environment, which reduces the efficiency of thermal power plants and upsets the ecological balance of the environment. A widely known method of generating energy at nuclear power plants is that water is supplied to the active zone of a nuclear reactor, where it is heated using nuclear fuel. Heated water is removed from the treatment area for subsequent use as intended. However, the costs of extracting and preparing nuclear fuel for a nuclear reactor are high, which negatively affects the cost of energy received. In addition, nuclear fuel cannot be fully used in a nuclear reactor, which significantly reduces the efficiency of the latter. Moreover, the fuel of nuclear power plants is used about thirty times less efficiently than that used in thermal power plants. Potentially, the development of nuclear energy poses serious problems related to environmental protection. Accidents that occurred at a number of nuclear power plants convincingly testify to this. A known method of obtaining energy, which, according to its essential features, is the closest to the invention, is US Patent No. US4333796A (19 May 1978). This method involves supplying liquid lithium to the treatment zone, where it is subjected to periodic acoustic forces to create cavitation bubbles in it, resulting in a fusion reaction. The basis of the invention is the task of creating a method of producing energy that would eliminate the costs of production, preparation and transportation of fuel, and would also allow to use any substance in a liquid state as a working medium. This problem is solved by creating a method of generating energy, including feeding the substance in the liquid phase to the treatment zone and creating cavitation bubbles in the substance. While according to the invention, cavitation bubbles in the substance are made by creating a periodically changing pressure having constant and variable components, and these components are selected from the following ratios: P1 = from 0.3 to 0.7 (P2+P3); andP2 + P3 - P1 = from 1 to 10 σ,in which:P1 - represents the constant pressure component (in MPa),P2 - represents the variable pressure component (in MPa),P3 - represents the saturated vapour pressure (in MPa) of the substance being treated at the temperature at which it is fed into the treatment zone, andσ - is the tensile strength of the substance being treated at the temperature at which it is fed into the treatment zone (in MPa). Subject to the indicated conditions of simultaneous action of alternating and static pressures on a substance in a liquid phase, cavitation bubbles form in a liquid at the moment when the sum of two quantities: the amplitudes of the alternating pressure and the pressure of saturated vapour of a substance at a given temperature, exceeds the sum of two values: static pressure and fluid tearing strength at a given temperature. This moment in time coincides with the moment of action of the negative half-wave of variable pressure. During the action of a positive half-wave of alternating pressure on the liquid, the sum of two pressures acts on the cavitation bubbles: the amplitude of the alternating pressure and the static pressure, which tends to compress the bubbles, that is to say, it slams them. At the moment of collapse of the bubbles, their walls under the action of the pressure difference acting on the cavitation bubbles accelerate, acquire kinetic energy and collide in the centre. The magnitude of the kinetic energy acquired is sufficient to break the bond between the nucleons, overcome the repulsive forces of the nuclei and initiate interaction between the elementary particles contained in the nuclei of the processed substance (neutrons, protons). As a result, in the local area of matter, at the moment of the disappearance of the cavitation bubble (its collapse), nuclear reactions occur with the release of a large amount of energy. The energy released in the treatment area is converted into heat in a liquid. This heat is continuously removed from the treatment zone in the form of a heated liquid and used as necessary, and the cooled liquid is returned to the treatment zone. If it is necessary to change the energy production, vary the alternating pressure and/or constant pressure within the specified limits. In this case, the specified ratio of alternating and constant pressures must be observed, because if it is violated, either by increasing the alternating pressure above the specified pressure or by decreasing the constant pressure below the specified pressure, cavitation bubbles of a large size are formed in the fluid which do not have time to slam, as a result, the energy release is terminated. In the case of increasing the constant pressure above the specified pressure or decreasing the alternating pressure below the specified pressure, cavitation bubbles in the liquid cannot be formed and therefore no energy production will occur, since in this case, the tensile stresses in the treated liquid will be less than the tensile strength of the liquids.Brief description of Illustrations The proposed method of generating energy can be carried out in a known ultrasonic activator (application PCT / RU92 / 00195), which will be described below. For a better understanding of the invention, specific examples of its execution are given with reference to the attached drawings, wherein: Fig. 1 schematically shows an ultrasonic activator in which the proposed method can be implemented; Fig. 2 and 3 present diagrams of experimental setups for implementing the proposed method; Fig. 4 and 5 show a graphical dependence of the amount of energy released from the magnitude of the variable and static pressures; Fig. 6 and 7 graphical dependence of γ + β-radiation on the composition of the processed substance in the implementation of the proposed method; Fig. 9 shows graphically the dependence of neutron radiation on the operating mode of the setup shown in Fig. 3, and on the distance between the neutron detector and the ultrasonic activator in the implementation of the proposed method.The preferred embodiment of the invention The processed liquid, for example water, is fed into the ultrasonic activator, schematically depicted in Fig. 1. The ultrasonic activator contains two or more working chambers 1, connected in series (there are four in this example), in each of which impellers 2 of a centrifugal pump are installed with rotors 3 fixed on the periphery in the form of perforated rings. Coaxial to the rotors 3 in the cases 4 of the working chambers 1, opposite each rotor 3, is a stator 5, made in the form of a perforated ring. The working chambers 1 are interconnected by means of diffusers 6. The last working chamber 1 is connected to the first chamber 1 by a circulation circuit 7.Ultrasonic activator operates as follows During rotation, the impeller 2 of the centrifugal pump gives kinetic energy to the fluid being processed, which is partially converted into static pressure (in diffusers 6), and partially into alternating pressure (when passing the perforations of rotor 3 and stator 5). Depending on the selected fluid, its temperature and the calculated values of static and variable pressures that satisfy the above dependencies, the design and technological parameters of the ultrasonic activator are established and maintained (see PCT / RU 92 / 00195). During the period of the negative half-wave of the alternating pressure, cavitation bubbles are formed in the liquid in the treatment zone. During the next positive half-wave of the alternating pressure the cavitation bubbles are collapsed in the liquid in the treatment zone. By the end of this half-period, the bubbles deposit kinetic energy determined by the difference in pressure acting on the bubbles from outside and inside. From the outside, the sum of alternating and constant pressures acts on the bubbles. Inside the bubbles, it is the pressure of saturated vapours of the liquid that acts on them. In addition, other forces, determined by the physical and chemical properties of the liquid and the absolute pressure of the vapour, also influence the motion of the bubbles. At the moment the bubble disappears (at the moment of its collapse), the kinetic energy is converted into the collision energy of elementary particles. The energy released during the collapse of the bubble is several orders of magnitude higher than the binding energy of elementary particles (nucleons) in the nucleus. As a result of a collision of nuclei in the conditions of the proposed method, an interaction occurs between elementary particles of the constituent nuclei. The energy released in the reactions, controlled by the described method between elementary particles, is converted into thermal energy in a liquid, and it is removed from the treatment zone with a liquid stream. In specific examples of the implementation of the claimed method, experiments are described that are performed in experimental installations with open and closed cycles (Figs. 2 and 3). The installation shown in Fig. 2, contains an ultrasonic activator 8, the description of which is given above, an electric motor 9 for activating the activator, a power meter 10 for measuring power consumption, a device 11 for measuring the temperature of the processed fluid at the input and output, a radiometer 12 for measuring γ and β-radiation with a radiation detector 13, a neutron radiometer 14 for measuring neutron flux with a neutron detector 15, a manometer 16 for measuring static pressure, a device 17 for measuring alternating pressure, a device 18 for measuring liquid flow rate and a device 19 for measuring the frequency spectrum of alternating pressure. A valve 20 is installed on the pipeline discharging liquid from the installation. Valve 21 is installed between pipelines discharging and supplying liquid to the installation.Installation works as follows Liquid, such as tap water, is piped to the inlet of the installation. The valve 20 sets the amount of water flow passing through the ultrasonic activator 8, where they support the above calculated ratio of variable and static pressures. To change the static and variable pressures within the specified limits, valve 21 is used. Having established the necessary operating mode of the installation, they are allowed to stand for 10-15 minutes to achieve stable operation, at a given mode and make the necessary measurements. The power consumption (N1) is measured by a wattmeter 10. The generated thermal power (N2) is determined by the product of two measured quantities: the difference (Δt) of the temperature at the inlet and outlet of the activator 8, measured using the device 11 and the flow rate (G) of the fluid passing through the activator 8, measured by the device 18, and the heat capacity constant (c) of the treated fluid: N2 = Δt•G•c (W) (1) Instruments 16 and 17 for measuring pressure are used to monitor the operation mode of the installation. The frequency spectrum of the variable pressure is measured by a spectrometer 19. Using radiometers 12 and 14 with their detectors 13 and 15, the fluxes of ionising radiation are measured. After all of the above measurements, we can conclude that the power consumption for the implementation of the proposed method is on average two to three times less than the heat output released as a result of the proposed method. Moreover, ionising radiation released during the implementation of the proposed method does not exceed the natural background. To confirm the existence of nuclear reactions in cavitation bubbles of the treated liquid and the formation of γ, β and neutron radiation when implementing the proposed method the installation shown in Fig. 3 is used. This installation is made similar to the above described and depicted in Fig. 2 however, it differs from the latter due to the presence of a container 22 for the accumulation of these radiations to a value that can be measured by available instruments. The fluid in this case circulates in a closed loop between the ultrasonic activator 8 and vessel 22 for as long as it takes to accumulate a level of radiation that is measurable. To more clearly confirm the occurrence of nuclear reactions in cavitation bubbles of the liquid being treated, additives of stable isotopes (oxygen, nitrogen, carbon, sodium) were used, which, as a result of nuclear reactions occurring in activator 8, turn into unstable isotopes, which were recorded using radiometers 12 and 14. Thus, when implementing the proposed method, it becomes possible on an industrial scale to obtain the energy of strong interaction of elementary particles.Example 1 The strong interaction energy of elementary particles formed in tap water at a temperature of 20°C is obtained. This water at this temperature has a tensile strength of approximately 0.35 MPa. The pressure (P3) of saturated vapours at the indicated temperature is approximately equal to zero.By dependencies:P1 = 0.3 (P2 + P3); andP2 + P3 - P1 = σ,solve the system of these equations to find the constant pressure (P1) and variable pressure (P2) necessary for the proposed method:P1 = 0.3 P2; andP2 - 0.3 P2 = σ;Tap water at a temperature of 20°C is fed into the ultrasonic activator shown in figure 1., where, by acting on the valves 20 and 21 shown in figure 2, using measuring instruments 16, 17 and 19, the variable and constant pressures defined above can be established. When passing tap water through an ultrasonic activator, the water is heated as a result of strong interaction of elementary particles. Heated water is removed from the activator and sent through the pipeline to the consumer of thermal energy. After transferring thermal energy to the consumer, the chilled water is either discharged into the sewer or returned to the activator for reuse. Using a wattmeter 10, the electrical power consumption (N1) to realise the proposed method was measured, which was equal to 6 kW. The power produced (N2) according to the above expression (1), in this case is equal to 6.5 kW. Dividing the electric power consumption (N1), which in this case is 6 kW, by the produced power (N2), which is 6.5 kW, a coefficient (k) of 1.08 is obtained.Examples 2-12 These were performed in a similar way to that described in Example 1. The substance under processing, its temperature, treatment parameters (P1, P2, P3, σ), power consumption (N1), heat output (N2) and coefficient (k) are given in Table 1. The table shows that when processing various substances in the liquid phase at certain variable and static pressures lying within the specified limits (i.e., when implementing the proposed method), the energy received is several times greater than the energy consumed. The graph in Fig. 4, shows the dependencies of the power difference (ΔN) of heat release and power consumption on the ratio of constant and alternating pressure in the activator. Said dependence was determined by the present method, using tap water at a temperature of 20°C as the treated substance. The variable pressure is plotted on the x-axis, and the power difference (ΔN) is plotted on the y-axis. Curve I on the graph corresponds to the static pressure P1 = 0, curve II to the static pressure P1 = 0.6 MPa, curve III to the static pressure P1 = 0.8 MPa, curve IV to the static pressure P1 = 1 MPa.From these graphs, the boundary of the declared interval of the ratios of variable and static pressures is clearly visible. Everything that lies to the left of 2.3 MPa (graph I), i.e. the variable pressure P2 is less than 2.3 MPa at a static pressure P1 = 0, does not satisfy the proposed pressure ratio P1 and P2, and the amount of energy released is less than the amount of energy consumed. With an increase in the variable pressure P2 to more than 2.3 MPa, i.e. subject to the specified ratio of P1 and P2 , the released energy is greater than the energy consumed. For graph II, where the static pressure P1 is 0.6 MPa, everything to the left of 1.2 MPa does not satisfy the proposed ratio, and the amount of energy released is less than the amount consumed. Similarly, by extrapolation, it is possible to determine the area in which the energy consumed is less than that released for schedules III and IV. Fig. 5 shows a graphical dependence of the difference in power (ΔN) heat and power consumption from the ratio of P1 and P2 when implementing the proposed method in a device of lower power.* graph V - corresponds to the static pressure P1 = 0.1 MPa,* graph VI - P1 = 0.2 MPa,* graph VII - P1 = 0.3 MPa,* graph VIII - P1 = 0.4 MPa,* graph IX - P1 = 0.5 MPa. From these graphs V, VI, VII, VIII, IX, as well as from graphs I, II, III, IV, shown in Fig. 4, it can be seen that only when the specified ratio of P1 and P2 is fulfilled, the released energy is greater than the energy consumed. Moreover, for graph V it is seen that to the right of the value of P2 = 26 MPa, i.e. if the above ratio is not observed, the released energy becomes less than that consumed. Since the proposed method of obtaining energy is characterised by the practical absence of ionising radiation, to confirm the occurrence of nuclear reactions in cavitation bubbles, we processed liquids in Figs. 6 and 7. Graphical dependencies of γ + β-radiations are presented for the treatment of tap water at a temperature of 20°C with various additions of stable isotopes of various substances. The y-axis gives the average value of the number of γ-quanta and β-particles in one second, recorded by the detector 13 of the radiometer 12 (Fig. 2). Averaging is given for each hour of measurement. The x-axis shows time (t) in hours and days. In addition, the x-axis in Fig. 6 and 7 marked the time (τ) of the ultrasonic activator. Thus schedule 61 shows the relationship of γ + β- radiations with tap water treated at 20°C with the addition of air, in an amount of 1.8 × 10-6 kg/s, in accordance with the proposed method. The schedule 62 the same with the addition of air in the amount of 3.6 · 10-6 kg/s, schedule 63 the same with the addition of air in the amount of 0.9 · 10-6 kg/s, schedule 64 the same with the addition of carbon dioxide 2 · 10-6 kg/s, schedule 65 is the same with the addition of carbon dioxide in an amount of 10-6 kg/s. Graph 71 (Fig. 7) reflects the dependence of γ + β- radiation detected by the detector 13 on the residence time of the latter in the core. Graph 72 of Fig. 7 shows the dependence of γ + β- radiations with tap water treated at 20°C with the addition of carbon dioxide in an amount of 4 × 10-6 kg/s, graph 73 same with the addition of carbon dioxide in an amount of 2 · 10-6 kg/s, graph 74 reflects the dependences of γ + β radiation without activating the ultrasonic activator, recorded on the surface of the activator (indicated by dots) and at a distance of 13 m from the activator (indicated by Δ), graph 75 is the same as graph 72 with the addition of carbon dioxide in the amount of 16 x 10-6 kg/s and the dependence of γ + β-radiation, recorded at a distance of 13 m from the activator (indicated by Δ).The graphs shown in Fig. 6 show that when the ultrasonic activator is switched on, i.e. when water is treated at 20°C and the ratio of alternating and constant pressures is within the specified limits, there is an increase in γ + β-radiation, which is only possible during nuclear reactions.Similar studies were carried out when sodium carbonate (Na2CO3 ), gasoline, lithium chloride (LiCl) and other substances were added to tap water. The results of the recorded γ + β- radiation are similar to those presented in Fig. 6 and 7. The increase in neutron radiation, which confirms the occurrence of nuclear reactions in the implementation of the proposed method, is illustrated in Fig. 8 and 9. Fig. 8 depicts a graph of neutron radiation of the natural background for several hours. The neutron flux (n, 1/sec) is marked on the y-axis, time (t) in hours on the x-axis.Fig. 9 is a graph of neutron radiation during operation of an ultrasonic activator, i.e. when implementing the proposed method and observing the ratio of variable and static pressures, when processing tap water with a temperature of 20°C, with the addition of lithium chloride (LiCl). Figure 9 also shows three periods, indicated by the time τ1 , τ2 and τ3 during which the detector 15, of the neutron radiometer 14, was installed at a distance of respectively; 0.5, 1.25 and 3.2 m from the surface of the ultrasonic activator. When comparing the graph depicted in Fig. 8 with the graph depicted in Fig. 9, it is seen that the neutron radiation during operation of the activator is significantly higher (by several orders of magnitude) than the natural background. This once again indicates that when implementing the proposed method in the cavitation bubbles of the treated fluid, nuclear reactions occur. Similar studies on neutron radiation were also carried out when other components (for example, gasoline) were added to the liquid to be processed, which made it possible to increase neutron radiation to a level that can be measured with existing instruments. These studies have led to similar results. Thus, the use of the proposed method allows on an industrial scale to obtain the energy generated as a result of the strong interaction of elementary particles of the processed substance. The easiest way is to use the proposed method on an industrial scale is in the field of heating and hot water supply for civil and industrial facilities. For this, it is necessary to connect the device, for implementing the proposed method, to the heating and hot water supply system of the facility, for example, in heating, distribution and pumping stations. Using the proposed method is economically advantageous because, firstly, in this case, the capital costs are reduced to almost zero. There is no need to build boiler rooms, fuel depots, access roads, transport pipelines and much more. Secondly, the amount of energy produced is several times higher than the energy consumed. Thirdly, the environment is not polluted by fuel losses during extraction, transportation and its combustion products.Claims (1)A METHOD FOR ENERGY PRODUCTION, including feeding a substance in a liquid phase to a treatment zone and creating cavitation bubbles in a substance, characterised in that cavitation bubbles in a substance are created by creating a periodically changing pressure having constant and variable components, and these components are selected from the following ratios: P1 = from 0.3 to 0.7 (P2 + P3); and P2 + P3 - P1 = from 1 to 10 σ, in which:P1 - represents the constant pressure component (in MPa),P2 - represents the variable pressure component (in MPa),P3 - represents the saturated vapour pressure (in MPa) of the substance being treated at the temperature at which it is fed into the treatment zone, andσ - is the tensile strength of the substance being treated at the temperature at which it is fed into the treatment zone (in MPa).Thankyou for listening to RemoteView.ICU This is a public episode. If you'd like to discuss this with other subscribers or get access to bonus episodes, visit remoteview.substack.com/subscribe

Hi, my name is Bob Greenyer and welcome to RemoteView.ICUWhen using the term Unidentified Flying Object (UFO), we should know that this can also apply to something created by nature without the action of sentient life. That being said, Avi Loeb does suggest in his videos on the subject, that he considers the ‘interstellar object’ IM1, more than an inter-planetary rock. Moreover, there are direct headlines on the subject that suggest just this, for example: Harvard Professor Finds Microscopic Debris of Possible Extraterrestrial Technology You can follow the scientists Medium blog hereI would argue, that these spherules are possibly caused by the phase singularities present in Fractal Toroidal structures, and, the resultant formation and aggregation of coherent ordinary and dark matter, followed by its subsequent collective collapse.I would really like to see detailed Scanning Electron Microscopy (SEM) and spatial energy dispersive spectroscopy (EDS) maps of these spherules they are recovering from Papua New Guinea. Researchers in the Martin Fleischmann Memorial Project (MFMP) have produced (crenelated) iron spherules in a range of experiments, having a similar form to those claimed as coming from ball lightning (BL), air-burst phenomena and so called 'micro-meteorites'.In the case of Alan Goldwater’s ULTR experiment using Al foil in water, up to 3.44% atomic concentration of Mg was found alongside the iron. In my own replication of this ULTR experiment, similar Mg levels were found around the vortex centres where I expect the Fe + O magnetic cores are formed.Mg is double Carbon, which is produced readily by BL according to the likes of Brown, Solin Matsumoto, so it is not surprising therefore, to find this element as we did outside of carbon on a fractal toroidal Magneto Hydro-Dynamic (MHD) structure in a Dr. Ryushin Ohmasa vibrator plate (OHMA experiment). Of course, any coherent matter raining down from the IM1 “fireball” entered the water, so one might consider they had a similar death to those in ULTR and OHMA experiments, though a different path to initial coherence.Both ULTR and VEGA crenelated spheres do not contain Manganese, like the claimed IM1 spherules. However, VEGA BL in residual air with hydrogen did reveal structures with high levels of Ti just outside the main Fe + O sphere.The Fe to O ratio is as high as FeO2 - this is a magnetic substance only 'discovered' in 2017 using Fe2O3 squeezed between diamond anvils at pressures only found deep inside the Earth. Of course our ULTR and NOVA experiments are conducted at around atmospheric pressure, or well below such as in VEGA, so something is forming in these systems that can initiate immense ‘pressures’. I have argued this is the Fractal Toroidal Structure and its embedded toroidal moments and phase singularities.Our observations have shown, that outside of the Fe + O magnetic core of BL, you get other elements formingAvi says:“The metallic pearl-looking spherules are embedded in the volcanic ash and so our goal from now on is to retrieve all the magnetic material available on the sled magnets in the form of black powder and then identify the metallic pearls and separate them with tweezers.”The presence of ‘volcanic ash’ may be why they do not mention Si and O… however, would not a load of exploded BL, like the one that I identified in Henk Jurrien’s VEGA experiment above, look like “metallic spherules” embedded in ‘volcanic ash’?Secondly, we know that ball lightning forms in volcanic eruptions, so if it really is volcanic ash, perhaps these spherules are not from IM1 at all!Regardless, if there are many of these things formed in close proximity in such a dynamic situation as a volcanic eruption or a re-entry 'fireball’ and air-burst, it is likely some will wet together as they move from coherence to liquid elements, unlike the resonance driven NOVA, ULTR and VEGA experiments and so, larger spherules will form, via aggregation, which will include other elements synthesised as inclusions, this is what is observed also in their preliminary work. I suggest that Avi’s samples may be the typical outcome of non-resonant extremely dynamic BL producing events, as I have previously argued in my prior proposed explanation of the ‘unexplained’ ejecta found as a result of the Fukushima detonation event, which contained a high amount of Carbon alongside volcanic ash minerals and also Fe without Mn but with Ti and Mg.So to re-iterate, the claimed IM1 fragments of ‘unusual’ and atypical to meteoric material, could be the product of formation of BL coherent objects, due to the high energy and far from equilibrium environment created as the IM1’s original matter entered our atmosphere, traveled through it and into the ocean.ConclusionNo scientist that studies the products of our openly shared and easy to replicate experiments, should assume that the hardness or elemental composition of the spherules collected from Papua New Guinea are signs of something particularly special, other than the amazing product of the highly dynamic formation and collective effects of many Ball Lightnings, possibly resulting from the interaction of IM1 and our Earths atmosphere and ocean.Thankyou for listening to RemoteView.ICUUPDATE 1: 4 Jul 2023 ‘main stream’ interview - Tip off: Ron Kita This is a public episode. If you'd like to discuss this with other subscribers or get access to bonus episodes, visit remoteview.substack.com/subscribe

Hi, my name is Bob Greenyer and welcome to RemoteView.ICU2nd May 2023I was happy that I could not pick up the van hire until mid-day, since I had not slept much in the previous few days, due to unpleasant flight times and other other transport wearing me down. Moreover, I knew that later in the day I would have to be alert to drive for 6 or so hours into the late evening with a heavy load.So after a good rest, I checked out of my accommodation at 10 am and went to a recommended local small eatery called ‘Goodfellas’ for an all-day-breakfast and some wakeup juice.It was very good too.After picking up the van, which was around £500 for the 2 day one-way hire, I went down to the self-storage centre where, after going through the gate I was greeted by two people I had never met and their beaming smiles!Expected thingsWe had no time to open the very many boxes and bags in which his things had been stowed, other than to make better use of space where we could. Periodically however, things I knew that were clearly used in his LION experiments appeared, like this souvenir tea tin, typical of that which he used for holding the dental x-rays when exposing them to a cooled reactor following a run.And just as he had said was his plan, there were little engines that might possibly be coupled to a LION reactor as a demonstration of its operation in the future. Of the things that were loose, there was a beautiful Stirling engine……and a little custom steam boiler. He really was serious about doing this.Unexpected thingsAs the documents came out, the very first one was an article from ‘Nexus’ magazine from February / March 1994. It was about the first new finds in the Great Pyramid of Giza in 1200 years! I had no idea that LION had such a long standing interest in the Great Pyramid, but any doubt was dispelled when several annotated books on the subject were handed to me. I thought I knew him well, but there was clearly many interests he had away from the LION reactors themselves. It must have been odd for him, when I apparently randomly started discussing this last remaining wonder of the ancient world.The only other document I found as I split a pile of papers in half, was a printout of a comment I had made on a forum, staunchly defending the privacy of a researcher the MFMP was working with who wanted anonymity by referring to himself as me356. Every firm point I made, LION had underlined. This was in 2016, it was only after this email that I was approached by LION in 2017, to analyse the first reactors he shared with the MFMP. And really, other than an interest in astronomy and space vehicle launches, this is most of what he shared with me.He did not share for instance, a curious large natural Quartz crystal, mounted such that it could be spun by a motor, with what looks like silver strips inlayed into each long face. One could imagine that as the crystal was spun, opposite electric potentials would have been place across the crystal. What was it for? What inspired it? Perhaps a reader knows or maybe we will have to wait to see if he described its purpose somewhere in the large volume of notes, that we loaded into the van.I was starting to see that LIONs research was much more broad than he had let on. For instance, there was a large piece of granite, this time with silver wire coils around it, with insulated connection points. It was at this point that Martyn admitted that he was doing research similar to whatever this was for and so, without a clue of what to do with it myself, I suggested that if he wanted to, he should take it. I am again very curious to find out the thinking behind it.Part way into the process, another lock-up owner round the corner, came with a hired mobile document shredding service van, only to find they could not get through as we blocked the way and already had a lot of material out on the tarmac. I didn’t like to ask what they were shredding.By about 4.30 pm, we had loaded the van. It was low on its suspension and I was worried about the long drive ahead. A huge thank you to Martyn and Tony for making it possible to save LIONs work. Of the personal things we did not take, there was a pastel drawing of LION, that I have since been given permission to share. It was I think from perhaps 35 years earlier than when I first met him. When I met him, his brow was more connected and his beard was long and bushy, perhaps you can see why I said he looked like the head on the human headed lion Assyrian gate guard I had imaged a few days prior in the British Museum.The weather was fine for the long journey to Newcastle and after a coffee, I set off into the west London rush hour. Honestly, I was happy that 10-20 mph was all I could do for the first hour, as the vehicle drove like a tank pulling a barge.As I got onto the motorway later, I had to be very aware of any imperfections in the road as even small dips would see the shock absorbers top out. I was seriously worried about a blow out and so I had to accept that Google maps expected arrival time at my destination, was going to be optimistic given the speed I was prepared to drive at.I stopped about 60% in for more coffee and then again at around 70% as my phone was about to die and the USB in the van did not charge it. Because I would not make it to the end stop without navigation, I had to find a solution, which I did by precariously suspending my open laptop by the gear stick and charging the phone off that. It was not helping my nerves, but it worked and from that point on I convinced myself it was my destiny to arrive safely - which, as it happens, I did, at around 11:30 pm.The volunteer who had offerred to take on the collection, greeted me with a hearty meal and some wonderful discourse. Then I went to bed, glad to be alive.Thankyou for listening to RemoteView.ICU This is a public episode. If you'd like to discuss this with other subscribers or get access to bonus episodes, visit remoteview.substack.com/subscribe

Late afternoon on the 24th April 2023, I got a deeply saddening message from a representative of the wife of the researcher we know as LION, who produced the experiments known as LION reactors.It is with great sorrow that I report that on the 4th April, the researcher known as LION, suffered a coronary heart attack and died at 6.30pm. It was unexpected and surprised everyone.His wife believes I was working with Neil on similar projects regarding Nuclear Fusion, and she wishes to keep her husbands legacy on-going and wondered if the project might be interested in taking over his life long research and experimental records.I cannot overstate how important LIONs work was to my own and that of the projects. Though he had been researching in the field for many years, he was the first independent researcher to test my 17 March 2014 proposal to use industrial Nickel / Diamond abrasives as a reaction matrix. It was his uniquely inventive series of LION experiments from mid June 2017 that produced the principle scientific data that lead to the realisation in 2018 called ‘O-Day’. Frankly, without him sharing his reactor with the MFMP for our analysis, ‘O-Day’ might never have happened.“Mining diamonds with LION” was the first video I published about ‘LION’s” experiments based on analysis I did on the reactors he shared with us. In the introduction to the video I state that it was“about the LION reactor, which is probably going to be one of the most important experiments conducted”I very deliberately did not give a time frame in the statement, as I believed this to be across all time and have not changed my conviction since. Indeed it was the individual ‘paw’ marks in the ‘LION track’, found with the help of my friend and colleague Alan Goldwater, that inspired the initial sketch of a basic Yin ‘O’ in Jan 2018 and it is the same paw print in Copper Oxide that is the monopole witness mark I use for the logo of this RemoteView blog.Mining Diamond with LION - 19 Jan 2018Seek Share presentation - 4 Oct 2018The first 1/3 of the original ‘O-Day’ deck was shared to the Russian research community in late 2018. Much of it was based on LION reactor analysisMonopole Clutch Presentation - 1 Oct 2020Again, I was given the opportunity to present to the Russian community in late 2020 and again, analysis of LION reactors played an important roleLION was a good soul, he was fighting with government and institutions to secure funding for his and other research in the field. I shall miss our regular conversations and emails. I feel honoured that I got to meet him in person.I am happy that he was able to see, in his life, the realisation of ‘O-Day’ through to ‘Evening’, published on the 2nd April, as he was so instrumental in initiating this realisation.His representatives are in the process of collecting together his work which seems to be an extensive Computer file of about 67 gigabytes and a lot of manufactured items of which the representative could not possibly name.Some of the items were stored in their common flat, but many were stored in a lock-up in Isleworth which is costing his wife a large sum of money, monthly, which she cannot afford. Moreover, the lock up have threatened her that they will remove it all and dump it in the street, the arrears have been paid up to date and for this month.However, it must be vacated by the 11th May 2023.His wife is staying with the representative that reached out and she is unwell also suffering quite serious memory loss, hence they were not able to contact us earlier.The computer used by Neil was completely full and its memory and had stopped working. The representative has had it repaired and the mentioned 67Gb of files, which were on the desktop, has been transferred onto a USB. There are further files in the computer which they have yet to identify and transfer.They have asked if we would be willing to take over his effort and all material/data etc.I immediately said yes, however, it has several logistical and cost challenges.First, I need to go to UK, hire a suitable van and have enough time to gather the items.I then need somewhere secure and trusted in the UK to transfer the items.Given that this must be done well inside 2 weeks, I am asking if the community can help ensure his legacy is preserved. Please send a private message if you can be of financial or logistical assistance.May his own eternal fire, his spirit, give us guidance as we forge ahead together, inspired by his work.You are free to explore the cosmos now my friend, you will be missed. This is a public episode. If you'd like to discuss this with other subscribers or get access to bonus episodes, visit remoteview.substack.com/subscribe

The night of day 4 was hell.Tried to fix it, tried replacement leads … to no avail, so there would be little chance of rest.Sho had to watch the videos to look for capture failure…We took a break for a really good curryFist experiment video to be uploadedOnly recording of Matsumoto presenting uncovered and shared!One of many microscope sessions shared!Tornado! This is a public episode. If you'd like to discuss this with other subscribers or get access to bonus episodes, visit remoteview.substack.com/subscribe

It has been a hard slog at the office. But we got a huge surprise that also presents challenges. This is a public episode. If you'd like to discuss this with other subscribers or get access to bonus episodes, visit remoteview.substack.com/subscribe

Hi, my name is Bob Greenyer and welcome to RemoteView.ICUOn the 14th April 2023, I registered for ICCF-25, the international conference on cold fusion or condensed matter nuclear science in Szczecin, Poland and submitted my abstract intended for oral presentation. This is that abstractUPDATE: FINAL SUBMITTED pdf for download here, thanks for comments.Practical Applications of the Fractal Toroidal Moment*Robert William Greenyer 11 Martin Fleischmann Memorial Project (MFMP), UKMartin Fleischmann and Stanly Pons likely experienced one of the most prominent Fractal Toroidal Moment (FTM) induced effects in their well known 1cc Deuterated Palladium (PdD) experiment that resulted in destruction of the apparatus and a large hole in the lab floor. This behaviour is typical for the natural FTM based phenomenon of ball lightning (BL), which for more than 100 years has been known to self-organise, ‘boil’ water, consume/disrupt glass & concrete, explode/disappear metals as clearly documented by Bychkov et. al. & Egely. Dr. Takaaki Matsumoto showed during PdD experiments that matter inside the electrode was consumed initially in spherical areas at grain boundaries and transmuted into common elements such as Mg, Si, Al, S, Ca & Fe. Later he conceded that it was the same process as BL and Ken Shoulders’ Exotic Vacuum Objects (EVOs). The process, driven in part by true charge separation, leads to the formation of coherent matter waves at any temperature.The MFMP has observed in experiments, specific magneto hydrodynamic structures forming in the free volume of a liquid, on surfaces/grain boundaries and in plasmas. If sufficiently driven, strong evidence of disruption of matter, from weakening/breaking of electron bonds, to transmutation, to dissapearance is seen to occur in structures that are defined by an event horizon that likely matches the Mean Square Radius of FTMs, which include shell forms of tori, spindle tori, spheres and their aggregates. At the highest level, a focused area is present that effects matter at a distance. Furthermore, in the sub-structures, both matter destruction and construction occur leading to the often observed heavier and lighter elements than those present at the start of the process.Though FTMs arising in condensed matter complicate experiments, its ability to reorganise matter and energy forms effortlessly, has utility. This presentation will show existing video and analytical evidence of currently working engineering applications of the considered physical phenomena, including material processing, significantly increasing fuel efficiency, radio-nuclide remediation and element synthesis.Thankyou for listening to RemoteView.ICUReferences This is a public episode. If you'd like to discuss this with other subscribers or get access to bonus episodes, visit remoteview.substack.com/subscribe