Insights from recent episode analysis
Audience Interest
Podcast Focus
Publishing Consistency
Platform Reach
Insights are generated by CastFox AI using publicly available data, episode content, and proprietary models.
Most discussed topics
Brands & references
Total monthly reach
Estimated from 27 chart positions in 27 markets.
By chart position
- 🇨🇦CA · Hobbies#11300K to 1M
- 🇺🇸US · Hobbies#27100K to 300K
- 🇦🇺AU · Hobbies#9030K to 100K
- 🇬🇧GB · Hobbies#1335K to 30K
- 🇸🇪SE · Hobbies#8110K to 30K
- Per-Episode Audience
Est. listeners per new episode within ~30 days
268K to 891K🎙 ~2x weekly·615 episodes·Last published 2w ago - Monthly Reach
Unique listeners across all episodes (30 days)
536K to 1.8M🇨🇦56%🇺🇸17%🇦🇺6%+24 more - Active Followers
Loyal subscribers who consistently listen
214K to 712K
Market Insights
Platform Distribution
Reach across major podcast platforms, updated hourly
Total Followers
—
Total Plays
—
Total Reviews
—
* Data sourced directly from platform APIs and aggregated hourly across all major podcast directories.
On the show
From 14 epsHosts
Recent guests
Recent episodes
Snodgrass in the House | 609
Jun 8, 2026
27m 57s
Kreg Edge Discussion and The Best Trade Show You'll Never Go To | 608
May 29, 2026
1h 05m 18s
Do Those Nickers Go All The Way Up? | WT 607
May 20, 2026
56m 37s
It's Tiny But It's Better Than Nothing | WT606
May 6, 2026
59m 42s
Shannon's Making Blue Ice Again | WoodTalk 605
Apr 23, 2026
59m 45s
Social Links & Contact
Official channels & resources
Official Website
Login
RSS Feed
Login
| Date | Episode | Topics | Guests | Brands | Places | Keywords | Sponsor | Length | |
|---|---|---|---|---|---|---|---|---|---|
| 6/8/26 | Snodgrass in the House | 609✨ | bandsawswoodworking+3 | Alex Snodgrass | — | Louisville, Kentucky | bandsawwoodworking+3 | WoodcraftWT2026 | 27m 57s | |
| 5/29/26 | Kreg Edge Discussion and The Best Trade Show You'll Never Go To | 608✨ | woodworkingtrade shows+3 | — | WoodRiver straight edgesStarrett steel straight edge+13 | — | Woodcrafttrade show+3 | WoodcraftWT2026 | 1h 05m 18s | |
| 5/20/26 | Do Those Nickers Go All The Way Up? | WT 607✨ | straight edgescolor changing wood+3 | — | The Wood Whisperer | SpokaneSeattle+1 | woodworkingstraight edges+3 | WoodcraftWT2026 | 56m 37s | |
| 5/6/26 | It's Tiny But It's Better Than Nothing | WT606✨ | small shop organizationpush stick usage+3 | — | Jessem Table Saw guidesJessem rip stick | — | woodworkingshop organization+3 | Patreon | 59m 42s | |
| 4/23/26 | Shannon's Making Blue Ice Again | WoodTalk 605✨ | woodworking as therapywood drying+4 | — | DW735Preppin' Weapons+4 | Greenville, SC | woodworkingtherapy+6 | Wood TalkWT2026 | 59m 45s | |
| 4/8/26 | What's a Buttress Flare | WT604✨ | woodworkingepoxy+3 | — | Carter bandsaw guidesepoxy+3 | San Carlos, CASacramento, CA | epoxybandsaw guides+3 | Wood TalkWT2026 | 49m 35s | |
| 3/25/26 | Kids Today | Wood Talk #603✨ | sharpening toolspole lathes+3 | — | Richmond Antique Tool Society | — | woodworkingsharpening+5 | Wood TalkWT2026 | 56m 56s | |
| 3/11/26 | Nobody Likes a Dirty Underbevel | WoodTalk 602✨ | woodworking technologywood finishes+3 | — | Festool DominoWalnut garage steps+6 | — | woodworkingtechnology+3 | Wood TalkWT2025 | 58m 03s | |
| 2/25/26 | Who Doesn't Love a Concealed Weapon? | WT601✨ | sharpening hand sawswoodworking design resources+3 | — | WoodcraftRegal Street Woodworks | Parkersburg, WVCincinnati, OH+2 | hand sawswoodworking+3 | Wood TalkWT2025 | 48m 04s | |
| 2/12/26 | Shame on You Powermatic | Wood Talk 600✨ | color matchingwoodworking projects+4 | — | Woodcraft | OrlandoClearwater | woodworkingtigerwood+5 | PowermaticWT2025 | 52m 16s | |
Want analysis for the episodes below?Free for Pro Submit a request, we'll have your selected episodes analyzed within an hour. Free, at no cost to you, for Pro users. | |||||||||
| 2/5/26 | Oops All Questions | WoodTalk 599✨ | woodworking challengescustomer relations+4 | — | woodtalkshowwoodtalkshow@gmail.com | — | woodworkingcustomer issues+4 | — | 57m 30s | |
| 1/28/26 | Fresh Baked Wood | Wood Talk 598✨ | safety lessonslumber strategizing+5 | — | WoodcraftFusion 360+1 | CaliforniaWoburn, MA+4 | woodworkingsafety+6 | Wood TalkWT2025 | 50m 02s | |
| 1/14/26 | Air Thirsty | Wood Talk 597✨ | woodworking techniquestool comparisons+4 | — | TormekValchromat+1 | — | thin woodbandsaw+5 | — | 1h 08m 26s | |
| 12/17/25 | You Have No Power Here! | Wood Talk 596✨ | year recaplistener questions+3 | — | — | Rockville, MDWalpole, MA | woodworkinglistener questions+5 | Woodcraft | 1h 22m 58s | |
| 11/20/25 | Greasy Ham Finish | Wood Talk 595 | Sponsored by :If you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.It’s show #595 - On today’s show, we’re talking about what to do when your workbench sucks, Is wood acclimation BS, and running a lathe backwards.Woodcraft GiveawayCongratulations to Matt Croyle who won the tap room cutting board kit.We also heard from Joe, last months lathe tool giveaway and he does actually have a lathe and has already put his new tools to use.Black Friday SalesWood Whisperer Guild Save 40% with code BlackFriday40BackSide Sandpaper, Wood Whisperer Specials are 20% off!Hand Tool School 50% with code HTS50for15; black friday but 15 yr anniversary.Matt Cremona - Free shipping on Chair Kits and some discount on everything elseWhat's on the BenchMatt is milling parts for his Guild project tableShannon used a power tool to cut up a live edge slab for an architect.Marc bought a new bike then lots of NYC pizza.Kickback Listener QuestionsVon asks how much wood actually acclimates over the course of a few weeks and if that is a myth.James asks what to do after he built his workbench and then feel inadequate about it after watching hundreds of videos.Joe asks why he would run his lathe backwards because his lathe motor runs both ways.Woodcraft Store EventsNovember 7th and 8th Kreg Demos at every store nationwide.November 8 & 9th- Turn for the Troops events nationwide.Local Store events: too many to list here this time...wow...Goooo Woodcraft! Check your local store for detailsAsk Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at woodtalkshow@gmail.comFinally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information. | — | ||||||
| 11/5/25 | Matching Finger Boo Boos | WoodTalk 594 | Sponsored by :If you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.It’s show #594 - On today’s show, we’re talking about finish for a commercial shelf, removable furniture tops and ripply cuts.Woodcraft GiveawayFor November Woodcraft is back with another giveaway. This time they are giving away a Tap Room Cutting Board Kit and you can register to win by filling out the form on our website here. We will draw a winner and announce at the end of November.What's on the BenchMarc finally finished the built-in desk for Nicole.Shannon rants about the quitting perception foisted on him by the market normal.Matt started work on the breakfast tableKickbackTom loves his shaper so much he is teaching a class about it at the Alpine Technical Workshops. If you want to learn more about shapers then this is the place.Von likes Shannon's philosophy on getting things done and it reminds him of the book "Getting Things Done" by David AllenMarc and Matt think how SketchUp handles versioning and authentication is stupid and they complain about it.Listener QuestionsRyan needs a finish suggestion for a comic book shelf he is building for a local store.Dana is building a TV cabinet that is big and heavy and asks about making the top removable yet structural.Rick is sawing Walnut logs with his woodworking guild and they are getting ripply cuts despite changing the blade and doing typical bandsaw triage.Woodcraft Store EventsNovember 7th and 8th Kreg Demos at every store nationwide.November 8 & 9th- Turn for the Troops events nationwide.Local Store events: too many to list here this time...wow...Goooo Woodcraft! Check your local store for detailsAsk Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at woodtalkshow@gmail.comFinally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information. | — | ||||||
| 10/22/25 | Hot Dog Flavor Notches | Wood Talk 593 | Grain filling turnings, crosscut sled vs mitersaw and keeping on track with a large project. Hosted on Acast. See acast.com/privacy for more information. | — | ||||||
| 10/9/25 | Tools in Your Holes | Wood Talk 592 | If you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.It’s show #591 - On today’s show, we’re talking about first aid kits, why no shapers?, when is enough, enough?, our favorite distractions when we have a creative block, and an alternative for table saw blade height adjustment.Woodcraft GiveawayWoodcraft is back with another giveaway for the month of October. This time they are giving away a 5 piece turning tool set and you can register to win by filling out the form on our website here. We will draw a winner and announce at the end of October.What's on the BenchMarc wasted time flattening a block plane sole.Shannon has started holiday turning.Matt has started designing a trestle table, specifically the base.Listener QuestionsDave asks about our first aid kits in our shops.Marc's first aid kitQuality TweezersTom has a shaper in his shop and loves it and can't figure out why no one has one or talks about them.Erica asks the questions every woodworker asks at some point: how flat is flat enough, how smooth is smooth enough, etc.Tom asks what we do when we hit a wall with a project and are ready to throw it out.Eduardo wonders if an answer to our table saw height adjustment issue from a previous episode could be solved by a scale placed on the fence. This suggestion fires up Marc and Matt and they decide to launch an entirely new form of table saw that will cost loads more and be less safe.Woodcraft Store EventsAll stores:October 17 and 18th JessEm Demos at every store nationwide.October 11th and 12th- Anniversary sales and open houses at the following stores: Baltimore, Virginia Beach, Pittsburgh, Birmingham, Lexington, Clearwater, and RichmondOctober 12th - Virginia Beach: Make a 3D Stairstep Cutting Board with Alex SnodgrassAsk Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at woodtalkshow@gmail.comFinally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information. | — | ||||||
| 9/24/25 | When Possible, Complicate It! - Wood Talk 591 | Sponsored by Woodcraft! https://www.woodcraft.com/startAnd by the generous contributions of our patrons: https://www.patreon.com/woodtalkToday we’re talking about Don't miss your chance to win a Wood River Mini Turning Tool Set: https://woodtalkshow.com/giveaway/What's on the Bench- Marc started the install of Nicole's builtin desk.- Shannon blew off the world and went bikepacking.- Matt is cleaning up to do more sawmilling.KickbackLast episode we had a question from Simon about loss of grip strength and how he should deal with it. We got some good suggestions:- Brian suggests "Hand-i-craft" also has nerve damage in their hand, leading to them coming up with some interesting approaches to woodworking: https://www.youtube.com/@hand-i-craft- Tommaso suggests: check out Essential Craftsman channel, he has a friend he works with who is an exceptional woodwork. The guy suffered a stroke and lost control of his dominant side, and theres a few videos on how he's dealing with it.- Marc suggests @delbasidtimbers on IG - https://www.instagram.com/delbasidtimbers/- Butch is impressed by how hard we work when we are actually getting paid to do the show.Listener Questions- Tom is making small, 3" ish circles with a router and template and seeks advice on a safe and clean way to do it. Marc suggests a sanding jig instead of a router and referenced this video from Bob Lang: https://youtu.be/m6FfXUAPx1w?si=XuydD01MByNN83DH- John is building a workbench and asks about getting quartersawn material vs flatsawn material.- Brandon is looking for a resource to help him identify trees so he can buy logs and know what he is getting. Hosted on Acast. See acast.com/privacy for more information. | — | ||||||
| 9/10/25 | Diamonds are a Woodworker’s Best Friend | WoodTalk 590 | Sponsored by :If you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.It’s show #590 - On today’s show, we’re talking about… Tools we wish existed, shopping for a grinder, Why don’t you buy another super expensive, super specific tool??Giveaway Winner!Nathaniel Snell is the winner of the WoodRiver small shoulder plane. We had over 500 entrants and thank you for everyone who entered. The great new is Woodcraft likes the idea and there will be more of this to come.What's on the BenchMarc is make cat collar tags with a laser and avoiding drywall.Shannon used his new WoodRiver shoulder plane and admits it might has a use in his shop despite years of hating on shoulder planes.Matt finishing clearing out after sawmilling just in time for more sawmilling.KickbackJim visited Woodcraft while listening to the show and spent $1000 on stuff he doesn't need. Goooo Woodcraft!Dining Table DiscussionWe talk about the double edged sword of specialty tools: gimmick or useful?Listener QuestionsSimon had a tough medical procedure and is looking for advice on how to move forward with his woodworking with lack of grip strength.Tommaso asks what tool we want that doesn't currently exist on the market.John is shopping for a grinder as he is tired of resetting the bevel using stones and sandpaper.Gary asks Matt why he doesn't have a chipper for all the offcuts and waste from his saw mill.Ask Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at woodtalkshow@gmail.comFinally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information. | — | ||||||
| 8/27/25 | The Forklift Life - Wood Talk 589 | Sponsored by Woodcraft! On today’s show, we’re talking about using beeswax in finish, cleaning up an old saw, and can I run these through planer??Hey Hey Hey! Shoulder Plane Giveaway!Marc has an extra WoodRiver small Shoulder Plane and he is going to give it away to one lucky person. Fill out the form here and take your chance to wind a shiny, steampunk looking shoulder plane. Hurry, because we will select the winner on the next show.What's on the BenchMarc is still working on the builtin desk for Nicole.Shannon did some dock repairs up in Maine and de-rusted his tools.Matt stacked and stickered wood.KickbackVon wants Matt to talk more about his saw milling decisions too.Michael likes Matt's radio style reading of Woodcraft store events.Cliff does all his project modeling on his iPad with his Apple Pencil and Shapr3D software.Listener QuestionsDavid got some beeswax and wonders about mixing his own finishes.Brandon has some old hand saws from his grandfather and great grandfather and he wants to clean them up to display them.Sandflex Blocks and Wizards Metal PolishBen has some old Oak flooring and a butcher block top that he has concerns about running through his planer.Woodcraft Store EventsAll September - Parkersburg, Cincinnati and Roanoke Woodcraft stores are having a Box Making Bonanza. Submit a box for a chance to win a Woodcraft gift card!Woodcraft of Hawaii is having Vendor Sale Weeks all month in September, including brands like Makita, DeWalt, Milwaukee, Stabila, and Bosch just to name a few.Sept. 5th - 7th, Omaha Woodcraft is having their Whale of a Sale - 15% off RIKON tools & accessories, 10% off select tools & accessories, 20% off wood, 15% off nearly everything else. Free demos & door prizes on Saturday, September 6.September 6 at Seattle Woodcraft, they’re having their 7th annual Tool Swap.September 6, Woodcraft of Indianapolis will host Family Day. Projects for kids, 15% off storewide, giveaways, food and special guests from Central Indiana Woodworkers, Fishers Makers Playground, Circle City Carvers, Festool & WoodMizer.September 13, 10-2 Woodcraft of Grand Rapids will host a Tool Swap & ShopOctober 4-5: Pacific Northwest Woodworking & Maker Expo Presented by Woodcraft held at Expo Idaho in Boise. Woodworking vendors, makers selling handmade goods, educational seminars and a tool sale. Tickets and details available now at https://www.woodmakerexpo.com/ Hosted on Acast. See acast.com/privacy for more information. | — | ||||||
| 8/13/25 | Bumping on It! - WT588 | On today’s show, we’re talking about sealing templates, magnets in our projects, and to flatten or penetrate first? Hosted on Acast. See acast.com/privacy for more information. | — | ||||||
| 7/23/25 | The Most Serious and Sad Show We've Ever Done | WT587 | On today’s show, we’re talking about… SERIOUS WOODWORKING DRAMA, our recommendation for a zero VOC finish, carpenters vs woodworkers, and grain vs figure. Hosted on Acast. See acast.com/privacy for more information. | — | ||||||
| 7/9/25 | AI and How We Use It | WT586 | On today’s show, we’re talking about… the role of AI in our work, sanding through the grits, and vertical grain drawer fronts. Hosted on Acast. See acast.com/privacy for more information. | — | ||||||
| 6/25/25 | Riding the Beam Saw | Wood Talk 585 | Sponsored by Woodcraft!How to lower your chances of back injury in the shop, cutting the end of a workbench, designing with secondary woods, super-duper ultra mega laminated benchtop Hosted on Acast. See acast.com/privacy for more information. | — | ||||||
Showing 25 of 620
Sponsor Intelligence
Sign in to see which brands sponsor this podcast, their ad offers, and promo codes.
Chart Positions
29 placements across 27 markets.
Chart Positions
29 placements across 27 markets.